 |
|
Lay
the line tightly across the kite back, side corner to side
corner, with the knot in the middle. Secure with three pieces
of sticky tape at each point. |
 |
|
Fold
the sail (straws on the inside) and match up th two side
corners so they are exactly together. Now take the two lines
together in your forefinger and thumb and run them out to
the loop at the end. Tie a knot that leaves 1 to 2 cm of
thread loose. |
 |
|
Hold
the loop and check the two sail edges are matching. If they
don't, undo the loop and repeat this instruction.
This is the most important setting - if it is incorrect
the kite will not fly well. |