|
|
 |
«
first
instructions
|
|
|
Step
6
Lay the line tightly across the kite back, side corner to
side corner, with the knot in the middle. Secure with three
pieces of sticky tape at each point.
|
|
Step
7
Fold the sail (straws on the inside) and match up the two
side corners so they are exactly together.
|
|
Step
8
Now take the two lines together in your forefinger and thumb
and run them out to the loop at the end. Tie a knot that leaves
1 to 2 cm of thread loose. |
|
Step
9
Hold the loop and check the two sail edges are matching.
If they don't, undo the loop and repeat this instruction.
|
|
|
 |
|
NOTE:
The sail edges must match. If they don't, the kite won't fly
very well! |
Be
safe: always fly your kite in an open space
Back to the beginning: Kite instructions
and kite template »
|
View 
